DYNAMIC BEHAVIOR OF THE PV GRID-CONNECTED INVERTER BASED ON L AND LCL FILTER WITH ACTIVE DAMPING CONTROL

PV Grid-connected inverters must fulfill the standards specifications of current harmonics injected to the grid. In order to satisfy these grid requirements, passive filters are connected between the inverter and the grid.... [ view full abstract ]

PV Grid-connected inverters must fulfill the standards specifications of current harmonics injected to the grid. In order to satisfy these grid requirements, passive filters are connected between the inverter and the grid. This paper compares the response characteristic of the traditional inductive (L) filter with the inductive-capacitive-inductive (LCL) filter. It is shown that the increasing the inductance L leads to a good ripple current suppression around the inverter switch frequency. The LCL filter provides better harmonic attenuation and reduces the filter size. The main drawback is the LCL filter impedance, which is characterized by a typical resonance peak, which has to be damped to avoid instability. Passive or active techniques can be used to damp the LCL resonance. To address this issue, this paper presents a comparison of passive and active damping strategies. Experimental results are given to support the theoretical analysis and to illustrate the performance of grid connected PV inverter system.