62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference Programme

2015,

19th - 21st May

62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference

Conference Programme

Monday, 18th May
Monday 4:00pm - 7:00pm	Check-in and Registration Venue Room Saint-Charles
Tuesday, 19th May
Tuesday 7:00am - 7:30pm	Registration and Administration Venue Room Saint-Charles
Tuesday 8:15am - 9:00am	Coffee and Networking Venue Fairmont The Queen Elizabeth Hotel
Tuesday 9:00am - 10:00am	KN-1 Welcome - Opening Address Venue Marquette
9:00am Welcome (Opening Day) » Iain Christie, CASI President
Tuesday 9:00am - 10:00am	KN-1 Welcome - Opening Address Venue Marquette
9:00am Welcome (Opening Day) » Sylvain Cofsky, GARDN Executive Director
Tuesday 9:00am - 10:00am	KN-1 Keynote Presentation Venue Marquette
9:00am Keynote Presentation » Michel Goulin CleanSky
Tuesday 10:00am - 10:30am	Coffee and Networking Venue Fairmont The Queen Elizabeth Hotel
Tuesday 10:30am - 12:00pm	PL-1 Opening Plenary Panel - Moderator: Iain Christie Venue Marquette
10:30am Partnering Globally for Sustainability » Robert Deluce Porter Airlines
Tuesday 10:30am - 12:00pm	PL-1 Opening Plenary Panel Venue Marquette
10:30am Partnering Globally for Sustainability » Tetsuya Tanaka ICAO
Tuesday 10:30am - 12:00pm	PL-1 Opening Plenary Panel Venue Marquette
10:30am Partnering Globally for Sustainability » Michel Goulain CleanSky
Tuesday 10:30am - 12:00pm	PL-1 Opening Plenary Panel Venue Marquette
10:30am Partnering Globally for Sustainability » Guillaume Vuillermoz STELIA Aerospace
Tuesday 10:30am - 12:00pm	PL-1 Opening Plenary Panel Venue Marquette
10:30am Partnering Globally for Sustainability » David Zingg University of Toronto
Tuesday 12:00pm - 1:00pm	Lunch - On your own
Tuesday 1:00pm - 2:00pm	PL-2 Plenary Panel - GARDN - Moderator: Sylvain Cofsky Venue Marquette
1:00pm Toward Clean, Quiet and Sustainable Air Transportation Systems » Alain Aubertin CARIC
Tuesday 1:00pm - 2:00pm	PL-2 Plenary Panel - GARDN Venue Marquette
1:00pm Toward Clean, Quiet and Sustainable Air Transportation Systems » James Corrigan Bell Helicopter Textron
Tuesday 1:00pm - 2:00pm	PL-2 Plenary Panel - GARDN Venue Marquette
1:00pm Toward Clean, Quiet and Sustainable Air Transportation Systems » Hayley Ozem Pratt & Whitney Canada
Tuesday 1:00pm - 2:00pm	PL-2 Plenary Panel - GARDN Venue Marquette
1:00pm Toward Clean, Quiet and Sustainable Air Transportation Systems » Benny Pang Bombardier Aerospace
Tuesday 2:00pm - 3:30pm	ADD-1 Unmanned Vehicle Design and Flight Control I Chaired By: Ruxandra Botez, ETS Venue Room Hochelaga 4
2:00pm Autonomous Flight Control of a Vertical Takeoff and Landing Fixed-Wing Unmanned Aerial Vehicle » Yasir Malang (University of Toronto Institute for Aerospace Studies), Hugh Liu (University of Toronto Institute for Aerospace Studies) 2:20pm Design of UAV-S4 composite morphing wing » jeremie Ndala (ETS, Laboratory of Applied Research in Active controls, Avionics and AeroServoElasticity), Ruxandra Botez (ETS, Laboratory of Applied Research in Active controls, Avionics and AeroServoElasticity), Oliviu Sugar Gabor (ETS, Laboratory of Applied Research in Active controls, Avionics and AeroServoElasticity) 2:40pm Image Based Visual Servoing for Quadrotor UAVs in Tracking Static Targets » Marinela Popova (University of Toronto Institute for Aerospace Studies), Hugh Liu (University of Toronto Institute for Aerospace Studies) 3:00pm INVESTIGATION OF PROPELLER DESIGN EFFECT ON LIFT AND DRAG PERFORMANCE OF SMALL UAV » Jeremy Laliberté (Department of Mechanical and Aerospace Engineering, Carleton University, Ottawa), Naglaa ElAgamy (Department of Mechanical and Aerospace Engineering, Carleton University, Ottawa)
Tuesday 2:00pm - 3:30pm	AERO1 Computational and Experimental Transition and Turbulence Chaired By: Catherine Mavriplis, University of Ottawa Venue Room Duluth
2:00pm Direct Numerical Simulation of Transition to Turbulence on a Laminar Morphing Wing » Jérémie Laplante (University of Ottawa), Catherine Mavriplis (University of Ottawa) 2:20pm Modeling laminar-to-turbulent transition on three dimensional wings » Jeremy Schembri (McGill University), Siva Nadarajah (McGill University)
Tuesday 2:00pm - 3:30pm	AERO1 Multidisciplinary Design Optimization 1 Chaired By: Siva Nadarajah, McGill University Venue Room Hochelaga 2
2:00pm Aerostructural Optimization of Winglets for Commercial Transport Aircraft » Shahriar Khosravi (University of Toronto Institute for Aerospace Studies), David Zingg (University of Toronto Institute for Aerospace Studies) 2:20pm Current Efforts in Aerodynamic Design Optimization Community to Establish Benchmark Cases » Siva Nadarajah (McGill University) 2:40pm Design Optimization of the Flap System of a Large Transport Aircraft » William Bissonnette (Ryerson University), Brien East (Ryerson University), Goetz Bramesfeld (Ryerson University) 3:00pm Exploratory Aircraft Design with High-Fidelity Aerostructural Analysis and Optimization » Zimi Zhang (University of Toronto Institute for Aerospace Studies), Shahriar Khosravi (University of Toronto Institute for Aerospace Studies), David Zingg (University of Toronto Institute for Aerospace Studies)
Tuesday 2:00pm - 3:30pm	AMT-1 Friction Stir Welding of Aerostructures Chaired By: Priti Wanjara & Bruno Monsarrat, NRC Aerospace Venue Room Mackenzie
2:00pm Introduction of Friction Stir Welding on front fuselage primary structures of aircrafts » Marie-Hélène philippe (Stelia Amérique du Nord), David Chartier (Stelia Aerospace), Vincent Galy (Stelia Aerospace), Franck Darras (Stelia Aerospace) 2:20pm Optimal Design of Robotic Friction Stir Welding Industrialization Scenarios » Bruno Monsarrat (National Research Council Canada – Aerospace), Gabriel Côté (National Research Council Canada – Aerospace), Delphine Allehaux (Airbus Helicopters), Simon Larose (National Research Council Canada – Aerospace), Jamel Chergui (Airbus Helicopters) 2:40pm Fatigue performance of AA7075-T6 Friction Stir Welding Joints and effect of post weld treatments » Simon Larose (National Research Council Canada – Aerospace), Assaf Farah (École Polytechnique de Montréal), Yves Verreman (École Polytechnique de Montréal), Priti Wanjara (National Research Council Canada – Aerospace) 3:00pm Surface Reinforced Aluminium Composites Fabricated with Friction Stir Processing » Allison Nolting (Defence Research and Development Canada - Atlantic), Cameron Munro (Defence Research and Development Canada - Atlantic), Xinjin Cao (National Research Council Canada – Aerospace), Simon Larose (National Research Council Canada – Aerospace), Priti Wanjara (National Research Council Canada – Aerospace)
Tuesday 2:00pm - 3:30pm	ASM-1 Composites I Chaired By: Leo Kok, Advanced Structures, Bombardier Aerospace Venue Room Hochelaga 3
2:00pm Simulating the Effects of Fabric Draping Deformations on the Properties of Composite Structures » Pierre Cyr (Maya Heat Transfer Technologies Ltd.) 2:20pm Damage tolerance specificity of thick composite structures used in Landing Gears » Arnaud Divialle (Héroux-Devtek), Pierre Legay (Centre Technologique en Aérospatiale) 2:40pm Effect that natural fibres have on the quasi-static and dynamic elasticity modulus, and damping ratio of glass fibre laminates obtained by the vacuum bag technique » Mario Villalon (Universidad Aeronautica en Querétaro), Hugo Vega (Universidad Aeronautica en Querétaro), Bayron Rubio (Universidad Aeronautica en Querétaro), Omar Mendoza (Universidad Aeronautica en Querétaro), Sergio Rojas (Universidad Aeronautica en Querétaro), Roberto Salas-Zuñiga (Centro de Ingenieria y Tecnología S.C.), Ulises Reyes-Zamora (Fuerza Aerea Mexicana, Secretaría de la Defensa Nacional), Alejandro Manzano-ramírez (CINVESTAV-Querétaro)
Tuesday 2:00pm - 3:30pm	HF-1 Cognitive Directions in Aviation Safety Training Chaired By: Triant Flouris, Hellenic American University Venue Room Hochelaga 5
2:00pm How We Think with our Eyes and See with our Brains » Thomas Anthony (University of Southern California) 2:20pm A comparison of task-related physiological responses in operators using EO/IR sensors or Night Vision Goggles to carry out air-to-ground search » Nicholas Berezny (N), Greg Craig (National Research Council Canada -), Madeline Lee (National Research Council Canada -), Heather Wright (National Research Council Canada -), Russel Thomas (National Research Council Canada -), Paul Kissmann (National Research Council Canada -), Jocelyn Keillor (National Research Council of Canada) 2:40pm Why are go-around policies ineffective? The psychology behind Go Around Policy non-compliance » Bill Curtis (Flight Safety Foundation’s International Advisory Committee) 3:00pm ANA's Journey to AQP » Yong Choi (All Nippon Airways)
Tuesday 2:00pm - 3:30pm	PROP1 Operations Chaired By: TBA Venue Room Hochelaga 6
2:00pm iPad Top of Descent Application » Omer Majeed (Specific Range Solutions Ltd.) 2:20pm Examination of the United States Air Force Aircraft Conversion from JP-8 Fuel to Jet-A Fuel with Additives, and Recommendations for the Royal Canadian Air Force » Sean Leithead (Royal Military College of Canada) 2:40pm Turbofans Engine Exhaust Noise Reduction Technology Development » Sid-Ali Meslioui (Pratt & Whitney Canada), Ninad Joshi (Pratt & Whitney Canada)
Tuesday 3:30pm - 4:00pm	Coffee and Networking Venue Fairmont The Queen Elizabeth Hotel
Tuesday 4:00pm - 5:30pm	ADD-2 Unmanned Vehicle Design and Aircraft Flight Control II Chaired By: Ruxandra Botez, ETS Venue Room Hochelaga 4
4:00pm Numerical and experimental measures of the Unmanned Aerial system UAS-S4 » Yvan Wilfried TONDJI CHENDJOU (ETS, Laboratory of Applied Research in Active controls, Avionics and AeroServoElasticity), Ruxandra Botez (ETS, Laboratory of Applied Research in Active controls, Avionics and AeroServoElasticity) 4:20pm Simulation of Non-Linear Flight Control using backstepping method » Edouard Finoki (ETS), Vahe Nerguizian (ETS), Maarouf Saad (ETS) 4:40pm Challenges to comply with complex requirements for aerospace systems » Michael Hanna (Bombardier) 5:00pm Towards Flight Stability Verification Using Statistical Techniques » Mohammad Massoud (State University of New York), Michael Facelle (State University of New York), Rajeev Narayanan (State University of New York)
Tuesday 4:00pm - 5:30pm	AERO2 Multidisciplinary Design Optimization 2 Chaired By: David Zingg, UTIAS Venue Room Hochelaga 2
4:00pm Exploratory Wing Design using the Reynolds-averaged Navier- Stokes Equations » David Koo (University of Toronto Institute for Aerospace Studies), David Zingg (University of Toronto Institute for Aerospace Studies) 4:20pm Optimization of Subsonic and Transonic Airfoils for Natural Laminar Flow using a Discrete-Adjoint Method » Ramy Rashad (University of Toronto Institute for Aerospace Studies), David Zingg (University of Toronto Institute for Aerospace Studies) 4:40pm PropOp: Multi-disciplinary Optimization Tool for the Design Phase for a UAV Propeller Design-Fabrication-Test Stream » Issi George (Ryerson University), Timothy Carroll (Ryerson University), Goetz Bramesfeld (Ryerson University)
Tuesday 4:00pm - 5:30pm	AERO2 Experimental Aerodynamics 1 Chaired By: TBA Venue Room Duluth
4:00pm Aerodynamic characteristics and near-field trailing vortex of a tip-mounted half-delta wing » Ying Su (McGill University), Tim Lee (McGill University) 4:20pm On the update and performance of the UTIAS anechoic wind tunnel » Derrick Chow (University of Toronto Institute for Aerospace Studies), Philip McCarthy (University of Toronto Institute for Aerospace Studies), Alis Ekmekci (University of Toronto Institute for A), Philippe Lavoie (University of Toronto Institute for Aerospace Studies) 4:40pm Passive Control of Wing-Body Junction Flows » Marc-André Théberge (University of Toronto), Alis Ekmekci (University of Toronto) 5:00pm Shear Stress Measurements in a Laminar Separation Bubble on an SD7003 Airfoil at Low Reynolds Numbers » David Sutton (University of Toronto Institute for Aerospace Studies), Philippe Lavoie (University of Toronto Institute for Aerospace Studies)
Tuesday 4:00pm - 5:30pm	AMT-2 Additive Manufacturing of Aeronautic Components Chaired By: Allison Nolting, Defence Research and Development Canada & Xinjin Cao, NRC Aerospace Venue Room Mackenzie
4:00pm Laser Additive Manufacturing of Aerospace Materials » Xinjin Cao (National Research Council Canada – Aerospace), Priti Wanjara (National Research Council Canada – Aerospace) 4:20pm Additive Manufacturing of Aluminum Alloys Using Pulsed Selective Laser Melting » Ryan Chou (Mining and Materials Engineering, McGill University), Mathieu Brochu (Mining and Materials Engineering, McGill University) 4:40pm Evaluation of near-net shapes for Spark Plasma Sintering of AA7075 » Mehmet Masum Tuncay (Mining and Materials Engineering, McGill University), A. Ghosh (Mining and Materials Engineering, McGill University), H. Aydın (Mining and Materials Engineering, McGill University), Mathieu Brochu (Mining and Materials Engineering, McGill University) 5:00pm Additive manufacturing for aerospace – Process modeling and simulation » Gaël Buvat (École de Technologie Supérieure), Yvan Beauregard (École de Technologie Supérieure), Sylvie Doré (École de Technologie Supérieure)
Tuesday 4:00pm - 5:30pm	ASM-2 Composites II Chaired By: Catharine Mardsen, Royal Military College of Canada Venue Room Hochelaga 3
4:00pm COMPARING THE BEHAVIOUR OF CARBON-EPOXY ANGLE PLY LAMINATES IN THREE AND FOUR-POINT BENDING » Ayesha Khatun (Royal Military College of Canada), Diane Wowk (Royal Military College of Canada), Catharine Marsden (Royal Military College of Canada) 4:20pm MECHANICAL BUCKLING BEHAVIOR OF COMPOSITE SANDWICHE PANELS WITH HYBRID GLASS/CARBON FACE SHEETS » Muhammad Basha (Department of Mechanical Engineering, École Polytechnique de Montréal), Rachid Boukhili (École Polytechnique de Montréal) 4:40pm Progressive failure analysis of notched laminated composites containing gaps and overlaps subjected to compressive loading » Aymen Marouene (École Polytechnique de Montréal), Rachid Boukhili (École Polytechnique de Montréal) 5:00pm Comparative study of different modeling approaches for skin stringer delamination growth under postbuckling deformations » Nidhal Bouslama (Université de Sherbrooke), Said JAZOULI (Bombardier Aerospace), Ahmed Maslouhi (Université de Sherbrooke)
Tuesday 4:00pm - 5:30pm	HF-2 Human Factors in Flight Crew Training & Performance Chaired By: Thomas Anthony, University of Southern California Venue Room Hochelaga 5
4:00pm Effects of Visual Clutter on Flight Performance, Workload and Gaze Pattern » Philippe Doyon-Poulin (École Polytechnique de Montréal), Benoit Ouellette (Bombardier Aerospace), Jean-Marc Robert (École Polytechnique de Montréal) 4:20pm Human Factors - Dual Qualified Pilots » Sofia S. (Air Transat) 4:40pm Human Factors training for the "unexpected" » Jean-Jacques Speyer (Vrije Universiteit Brussel) 5:00pm Effect of Wind Tunnel Velocity on the Dynamics of Human Walking » Rachid Aissaoui (Ecole de Technologie Superieure, Mechanical Engineering Department), Arnaud Law Hang (ETS), Oscar Carranza Moyao (ETS), Parent Gerald (ETS), Ruxandra Botez (ETS, Laboratory of Applied Research in Active controls, Avionics and AeroServoElasticity)
Tuesday 4:00pm - 5:30pm	PROP2 Combustion and Design Chaired By: TBA Venue Room Hochelaga 6
4:00pm Reaction rate during flame-flame interactions in highly turbulent premixed jet flames measured using high-speed and simultaneous T-PIV and OH/CH2O-PLIF » Jeffrey Osborne (University of Toronto Institute for Aerospace Studies), Adam Steinberg (University of Toronto Institute for Aerospace Studies), Campbell Carter (Wright Patterson Air Force Base) 4:20pm 3D Rayleigh Index Fields in Swirl Flames Measured from Tomographic Reconstruction of Doubly-Phase-Conditioned OH* Chemiluminescence » Benjamin Geraedts (University of Toronto Institute for Aerospace Studies), Adam Steinberg (University of Toronto Institute for Aerospace Studies), Christoph Arndt (2Institute of Combustion Technology, German Aerospace Center) 4:40pm Non-Volatile Particulate Matter Control for Aviation » John Hu (Pratt & Whitney Canada)
Tuesday 6:00pm - 7:30pm	Celebrating Women in Aerospace Reception Venue Room Hochelaga 1
Wednesday, 20th May
Wednesday 7:00am - 7:30pm	Registration and Administration Venue Room Saint-Charles
Wednesday 7:30am - 9:00am	Talent Meets Market Breakfast - Student - Working Professional Networking Event (Ticket Required) Venue St. Maurice
Wednesday 8:30am - 9:00am	Coffee and Networking Venue Fairmont The Queen Elizabeth Hotel
Wednesday 9:00am - 10:00am	PL-3 Plenary Panel - Moderator TBA Venue Marquette
9:00am UAV's: Aerospace Technology with Broad Impact on Sustainability » Stewart Baillie Unmanned Systems
Wednesday 9:00am - 10:00am	PL-3 Plenary Panel Venue Marquette
9:00am UAV's: Aerospace Technology with Broad Impact on Sustainability » Catherine Mulligan Concordia University
Wednesday 9:00am - 10:00am	PL-3 Plenary Panel Venue Marquette
9:00am UAV's: Aerospace Technology with Broad Impact on Sustainability » Thomas Snitch University of Maryland
Wednesday 9:00am - 10:00am	PL-3 Plenary Panel Venue Marquette
9:00am UAV's: Aerospace Technology with Broad Impact on Sustainability » Ruxandra Botez ETS
Wednesday 10:00am - 10:30am	Coffee and Networking Venue Fairmont The Queen Elizabeth Hotel
Wednesday 10:30am - 12:00pm	ADD-3 Stability and Controls Chaired By: Jean Francois Viau, Bombardier Aerospace Venue Room Hochelaga 4
10:30am Lateral control design for the Cessna Citation X with robustness and handling qualities requirements » Georges Ghazi (École de Technologie Supérieure), Ruxandra Botez (École de Technologie Supérieure) 10:50am Low Speed Aerodynamics and Static Stability Characteristics of a Hybrid Buoyant Aerial Vehicle » Anwar ul-Haque (International Islamic University Malaysia), Waqar Asrar (International Islamic University Malaysia), Ashraf Omar (University Of Tripoli), Erwin Sulaeman (International Islamic University Malaysia), Jaffar S.M.Ali (International Islamic University Malaysia) 11:10am Methods for Demonstration of Flight Parameters Based on Takeoff along Engine-Out Standard Instrument Departures » Zhiqiang Wei (Ryerson University, College of Air Traffic Management at Civil Aviation University of China), Joon Chung (Ryerson University), Alton Yeung (Ryerson University), Jason Naipaul (Ryerson University) 11:30am A PREDICTIVE PID CONTROLER DESIGN FOR AN ACTUATOR ATTACHED INSIDE A MORPHING WING » Duc-Hien Nguyen (École de Technologie Supérieure), Shehryar Khan (École de Technologie Supérieure), Michel Joel Tchatchueng Kammegne (École de Technologie Supérieure), Ruxandra Botez (ETS, Laboratory of Applied Research in Active controls, Avionics and AeroServoElasticity)
Wednesday 10:30am - 12:00pm	AERO3 Experimental Aerodynamics 2 Chaired By: Alis Ekmekci, University of Toronto Institute of Aerospace Studies Venue Room Duluth
10:30am The effect of boundary layer thickness on the wake of a blunt trailing edge body » Wenyi Zhao (University of Toronto Institute for Aerospace Studies), Ross Cruikshank (University of Toronto Institute for Aerospace Studies), Philippe Lavoie (University of Toronto Institute for Aerospace Studies) 10:50am Vortex flow generated by a reverse delta wing at low Reynolds number » Lok Sun Ko (McGill University), Ying Su (McGill University), Tim Lee (McGill University)
Wednesday 10:30am - 12:30pm	AERO3 Multidisciplinary Design Optimization 3 Chaired By: Jean-Yves Trépanier, École Polytechnique de Montréal Venue Room Hochelaga 2
10:30am Maximizing Sailplane Average Cross-Country Speed through Winglet Optimization » Travis Krebs (Ryerson University), Goetz Bramesfeld (Ryerson University) 10:50am Module Discretization and Consolidation of a Modular Morphing Wing » Ryan Perera (Ryerson University), Prakash Paudel (Ryerson University), John Kamel (Ryerson University), Fengfeng Xi (Ryerson University), Paul Walsh (Ryerson University) 11:10am The Drooped Wings of Gulls: Aerodynamic Optimum or Kinematic Constraint? » Stephen Andrews (Royal Military College of Canada), Ruben E. Perez (Royal Military College of Canada), William D. E. Allan (Royal Military College of Canada)
Wednesday 10:30am - 12:00pm	AMT-3 AMT/ASM Joint Session - Composites Manufacturing, Joining & Repair I (Part 1 of 2) Chaired By: Martine Dubé, École de Technologie Supérieure & Franck Dervault, Bombardier Aerospace Venue Room Mackenzie
10:50am Process requirements to incorporate thermoplastic components inside an aircraft » Franck Dervault (Bombardier Aerospace), Martin Deshaies (Bombardier Aerospace), Julien Chaussée (Bombardier Aerospace), Jérôme Pinsonnault (Bombardier Aerospace) 11:10am MANUFACTURING OF DOUBLE-CURVATURE CF/PPS CONTINUOUS-FIBRE WOVEN THERMOPLASTIC COMPOSITE PARTS THROUGH STAMP FORMING » Rouhollah Farahani (École de technologie supérieure, Department of mechanical engineering), Amir Bahram Kaganj (Concordia Centre for Composites, Concordia University), Mehdi Hojjati (Concordia Centre for Composites, Concordia University), Suong Van Hoa (Concordia Centre for Composites, Concordia University), Martine Dube (École de technologie supérieure, Department of mechanical engineering) 11:30am SIMULATION-ASSISTED MOLD DESIGN FOR FORMING OF THERMOPLASTIC PPS/ CARBON FIBER COMPOSITES » Den Nguyen (École de Technologie Supérieure), Martin Deshaies (Bombardier Aerospace), Tan Pham (École de Technologie Supérieure)
Wednesday 10:30am - 12:00pm	ASM-3 ASM/AMT Joint Session - Advanced Materials and Processes - I Chaired By: Leo Kok, Advanced Structures, Bombardier Aerospace Venue Room Mackenzie
10:30am Highlight Lecture with Patrick Comtois, Director Methods, Industrialization & Achieving Excellence System: INTEGRATING NEW EQUIPMENT & PROCESSES TO SUPPORT CUTTING-EDGE AIRCRAFT PROGRAMS - Joint Session between AMT and ASM Symposia » Patrick Comtois (Bombardier Aerostructures and Engineering Services) 10:50am Process requirements to incorporate thermoplastic components inside an aircraft » Franck Dervault (Bombardier Aerosapce), Martin Deshaies (Bombardier Aerospace), Julien Chaussée (Bombardier Aerospace), Jérôme Pinsonnault (Bombardier Aerospace) 11:10am Topology optimization of a flap track support for additive manufacturing » Jean-Philippe Carmona (Mechanical Engineering Dept - Polytechnique Montreal), Lionel Birglen (Mechanical Engineering Dept - Polytechnique Montreal), Julien Chaussée (Bombardier Aerospace), Franck Dervault (Bombardier Aerospace), Martin Deshaies (Bombardier Aerospace), Edmond Boileau (Bombardier Aerospace), Sylvain Turenne (Mechanical Engineering Dept - Polytechnique Montreal) 11:30am Compressive Instabilities in Metal-coated Polymer Microtrusses » Bharat Bhaga (University of Toronto Institute for Aerospace Studies), Craig A. Steeves (University of Toronto Institute for Aerospace Studies)
Wednesday 10:30am - 12:00pm	HF-3 Improving Situation Awareness Chaired By: Kyla Zimmerman, Transport Canada Venue Room Hochelaga 5
10:30am Configuration Effects On Departure Prediction Parameters Used In Representative Stall Models For Flight Training Simulator » Tony Zhang (University of Toronto Institute for Aerospace Studies), Peter Grant (University of Toronto Institute for Aerospace Studies) 10:50am Evaluating Probability of Detection using an Airborne Multi-Sensor System for Search and Rescue Operations: A Human Factors Flight Test Evaluation » Turner Strang (National Research Council Canada -), Greg Craig (National Research Council Canada -), Russell Thomas (National Research Council Canada -), Raymond J. Soffer (National Research Council Canada -), Simon Roy (Defence Research and Development Canada -), Anthony Brown (National Research Council Canada -), Jocelyn Keillor (National Research Council Canada -) 11:10am Towards a safer and more efficient communication process for aircraft ground deicing: Review of Human Factors and Team Communication Literature » Servet Günebak (Ecole de Technologie Superieure, Mechanical Engineering Department), Sylvie Nadeau (École de Technologie Supérieure), Francois Morency (École de Technologie Supérieure), Oliver Sträter (University of Kassel) 11:30am The Family CRM » Moon Sik Yim (Asiana Airlines)
Wednesday 10:30am - 12:00pm	PROP3 Structures and Design Chaired By: TBA Venue Room Hochelaga 6
10:30am Automatic Thermal and Stress Preliminary Analyses Applied to a Turbine Rotor » Maxime Moret (École de Technologie Supérieure), Hany Moustapha (École de Technologie Supérieure), Francois Garnier (École de Technologie Supérieure), Acher-igal Abenhaim (Pratt & Whitney Canada) 10:50am Effect of Entrance Aspect Ratio on the Performance of an S-Duct Diffuser of a Flight-Vehicle Inlet in High Subsonic Flow » ASAD ASGHAR (Royal Military College of Canada), William D. E. Allan (Royal Military College of Canada), Robert Stowe (Defence Research and Development Canada -), Derrick Alexander (LR Martec Limited) 11:10am Fireproof Testing of Pressurized Acoustic Organic Composite Sandwich Structures » Jason Hamp (Pratt & Whitney Canada)
Wednesday 12:00pm - 1:00pm	Lunch - On your own
Wednesday 12:15pm - 1:00pm	AGM Venue Room Saint-Maurice
Wednesday 1:00pm - 2:00pm	KN-2 Highlight Lecture Venue Marquette
1:00pm Sustainability: The Next Non-Functional Requirement » Dr. Ray O. Johnson, Business and Technology Executive
Wednesday 2:00pm - 3:30pm	ADD-4 Greener Aircraft and GARDN Projects Chaired By: Johan Johnson, Bombardier Aerospace Venue Room Hochelaga 4
2:00pm Canadian Aviation Industry Collaborative Efforts in Life » James Corrigan (Bell Helicopter Textron Canada Ltd.) 2:20pm GARDN I Project Abstract » Dominique Labour (CMC Electronique) 2:40pm Optimized Descents and Cruise » Rex Hygate (CMC Electronique) 3:00pm A Novel Design of a Hybrid Buoyant Aircraft- A Potential Greener Solution for Inter Connectivity of Malaysian Islands » Anwar ul-Haque (Inter), Waqar Asrar (International Islamic University Malaysia), Ashraf Omar (University Of Tripoli), Erwin Sulaeman (International Islamic University Malaysia), Jaffar S.M.Ali (International Islamic University Malaysia)
Wednesday 2:00pm - 3:30pm	ADD-4 Multidisciplinary Design Optimization Chaired By: Pat Piperni, Bombardier Aerospace Venue Room Hochelaga 2
2:00pm Non-hierarchical coordination for multidisciplinary design optimization in an industrial environment » Bastien Talgorn (McGill University), Michael Kokkolaras (McGill University), Antoine DeBlois (Bombardier Aerospace), Sylvain Arreckx (Ecole Polytechnique), Pat Piperni (Bombardier Aerospace) 2:20pm Simultaneous Optimization of Aircraft Family Design and Fleet Allocation on Multiple Markets for Economic and Environmental Considerations » Peter Jansen (Royal Military College of Canada), Ruben E. Perez (Royal Military College of Canada) 2:40pm Value engineering helps achieve best value in product development » Lucie Parrot (Martin Parrot) 3:00pm Reinforced Cellular Structure Morphing Skin » Fadi Mishriky (Ryerson University), Paul Walsh (Ryerson University), Fengfeng Xi (Ryerson University)
Wednesday 2:00pm - 3:30pm	AERO4 Computational Unsteady Aero and Fluid Dynamics Chaired By: Eric Laurendeau, École Polytechnique de Montréal Venue Room Duluth
2:00pm Investigation of the reconnection process of two vortices through spectral simulations » Guillaume Beardsell (Laval), Louis Dufresne (École de Technologie Supérieure), Guy Dumas (Laval University) 2:20pm Wake Analysis of Various Hydrokinetic Turbine Technologies through Numerical Simulations » Matthieu Boudreau (Laboratoire de Mécanique des Fluides Numérique - Université Laval), Guy Dumas (Laboratoire de Mécanique des Fluides Numérique - Université Laval) 2:40pm Three-Dimensional Aeroelastic Solutions via the Nonlinear Frequency Domain Method » Pierre-Olivier Tardif (McGill University), Siva Nadarajah (McGill University) 3:00pm Unsteady Vortex Lattice Method of an Aeroelastic Airfoil with Aileron Structural Non-Linearities » Luc AMAR (École Polytechnique de Montréal & Institut Supérieur de l'Aeronautique et de l'Espace), Marcin Chrust (École Polytechnique de Montréal), Eric Laurendeau (École Polytechnique de Montréal), Guilhem Michon (Institut Supérieur de l'Aéronautique et de l'Espace)
Wednesday 2:00pm - 3:30pm	AMT-4 Advanced Material Removal Technologies I (Part 1 of 2) Chaired By: Mouhab Meshreki, NRC Aerospace Venue Room Mackenzie
2:00pm Advanced Multi-Axis Trim and Drill Cell for Low Volume Multi-Part Configuration in a JIT Environment » Andrew Laird (Bell Helicopter) 2:20pm Controlling Independent Parameters of Vibration-Assisted Drilling of Carbon Fiber Reinforced Polymers for Optimized Hole Quality » Ahmad Sadek (National Research Council Canada -), Mouhab Meshreki (National Research Council Canada -), Helmi Attia (National Research Council of Canada) 2:40pm Nouvelle approche statistique de la définition de la durée de vie des outils de coupe basée sur la perte de performance » Antoine Bres (Bombardier Aerostructures and Engineering Services), Benjamin Larregain (Bombardier Aerostructures and Engineering Services) 3:00pm Programming a robot by demonstration for routing applications using a portable CMM » Gabriel Côté (National Research Council Canada – Aerospace), Jason Michel Lambert (National Research Council Canada – Aerospace)
Wednesday 2:00pm - 3:30pm	AMT-4 Real-time Diagnostics & Quality Control Chaired By: Christophe Bescon, NRC EME & Gabriel Côté, NRC Aerospace Venue Room Hochelaga 6
2:00pm Inspection of 3D-printed parts by laser ultrasonics » M. Lord (Aerostructures Technology Development, Bombardier Aerospace), Christophe Bescond (National Research Council Canada - Energy, Mining and Environment), Daniel Levesque (National Research Council Canada - Energy, Mining and Environment), Alain Blouin (National Research Council Canada - Energy, Mining and Environment), Jean-pierre Monchalin (National Research Council Canada - Energy, Mining and Environment), Priti Wanjara (National Research Council Canada – Aerospace), Xinjin Cao (National Research Council Canada – Aerospace) 2:20pm Introduction of a Robotic System for Aerospace Manufacturing: the Case for Non-Destructive Inspection and Beyond » Lionel Birglen (Mechanical Engineering Dept - Polytechnique Montreal), Leblanc Benoit (L3-MAS), Xavier Maldague (Université Laval), Iraj Mantegh (NRC Aerospace), Sylvain Roberge (Pratt & Whitney Canada), Martin Viens (École de Technologie Supérieure), Wen-fang Xie (Concordia University) 2:40pm Robotic Laser ultrasonic imaging of composite complex geometry components » Benoit Masson (Bombardier Aerospace), Christophe Bescond (National Research Council Canada - Energy, Mining and Environment), Christian Néron (National Research Council Canada - Energy, Mining and Environment), Christian Padioleau (National Research Council Canada - Energy, Mining and Environment), Jean-pierre Monchalin (National Research Council Canada - Energy, Mining and Environment)
Wednesday 2:00pm - 3:30pm	ASM-4 Advanced Materials and Processes - II Chaired By: Paul Vanderpol, UTAS Venue Room Hochelaga 3
2:00pm Thermal Stresses in Gas Turbine Combustion Chamber Panels made of Ceramic Matrix Composite » Larry Lebel (Pratt & Whitney Canada), Rachid Boukhili (École Polytechnique de Montréal), Sylvain Turenne (École Polytechnique de Montréal) 2:20pm Testing Ceramic Matrix Composites for Gas Turbine Combustion Chamber Panels » Larry Lebel (Pratt), Rachid Boukhili (École Polytechnique de Montréal), Sylvain Turenne (École Polytechnique de Montréal) 2:40pm Controlling thermal deformation through the use of lattice structures » Marina Toropova (University of Toronto Institute for Aerospace Studies), Craig A. Steeves (University of Toronto Institute for Aerospace Studies) 3:00pm Effect of post-deposition shot peening on oxidation resistance of NiCrAlY coatings fabricated by steered cathodic arc evaporation » Vladimir Pankov (National Research Council Canada -), Weijie Chen (AVIC Commercial Aircraft Engine Manufacturing Co Ltd), Linruo Zhao (National Research Council Canada -)
Wednesday 2:00pm - 3:30pm	HF-4 Human Factors Education and Knowledge Transfer Chaired By: Philippe Doyon-Poulin, Ecole Polytechnique de Montreal Venue Room Hochelaga 5
2:00pm Getting It Out There: Human Factors Research, From Concept to Publication » Leigh Norwich (Ashgate Publishing) 2:20pm Héritage: Unlocking Intergenerational Knowledge Transfer within the Montreal Aerospace Cluster » Alice Niyizurugero (HEC Montréal), Nebojsa Radojevic (HEC Montréal), Kevin Valdelievre (HEC Montréal), Patrick Cohendet (HEC Montréal), Laurent Simon (HEC Montréal) 2:40pm Open innovation in Mexico: the aeronautic sector in Querétaro » Mario Villalon (Universidad Aeronautica en Querétaro), Edita Solis (Universidad Autonoma de Querétaro) 3:00pm Analysis of Pilot Errors Caused by Cognitive Distortion » Capt. Bohun Kwon (Korean Air)
Wednesday 3:30pm - 4:00pm	Coffee and Networking Venue Fairmont The Queen Elizabeth Hotel
Wednesday 4:00pm - 5:30pm	ADD-5 Innovative Design Optimization I Chaired By: Jean Francois Viau, Bombardier Aerospace Venue Room Hochelaga 4
4:00pm Development of blended wing body aircraft design » Oliverio Velázquez Salazar (Ecole de Technologie Superieure, Mechanical Engineering Department), Julien Weiss (Ecole de Technologie Superieure, Mechanical Engineering Department), Francois Morency (Ecole de Technologie Superieure, Mechanical Engineering Department) 4:20pm Development of Core Functions for Aircraft Conceptual Design: Methodology and Results » Gustavo Esdras (Bombardier), Susan Liscouët-hanke (Bombardier) 4:40pm Parametric 3D Modeling for Integration of Aircraft Systems in Conceptual Design » Ali Tfaily (Bombardier Aerospace), Susan Liscouët-hanke (Bombardier Aerospace), Gustavo Esdras (Bombardier Aerospace) 5:00pm Aerodynamic Optimization of Regional Blended Wing-Body Transports » Thomas Reist (University of Toronto Institute for Aerospace Studies), David Zingg (University of Toronto Institute for Aerospace Studies)
Wednesday 4:00pm - 6:00pm	AERO5 Acoustics for Airframe Noise Reduction Chaired By: Werner Richarz, Echologics Venue Room Duluth
4:00pm GARDN - Airframe Noise Reduction » Stephen Colavincenzo (Bombardier Aerospace) 4:20pm Sound from Propeller Slipstream-Landing Gear Interaction » Werner Richarz (RTS) 4:40pm VORTICITY AMPLIFICATION AND ITS EFFECT ON FLOW SEPARATION FROM LANDING GEAR WHEELS » Graham Feltham (University of Toronto Institute for Aerospace Studies), Alis Ekmekci (University of Toronto Institute for A)
Wednesday 4:00pm - 5:30pm	AMT-5 Automated Fastening & Assembly Chaired By: Antoine Bres, Bombardier Aerospace Venue Room Hochelaga 6
4:00pm Strategies for the Mechanical Fastening of Composite Structure » Ian Cooper (Alcoa Fastening Systems and Rings) 4:20pm G12 Automatic Drilling & Fastening System » Eric Barton (GEMCOR) 4:40pm QUALITY EVALUATION OF BOLTED JOINTS USING TIGHTENING MONITORING AND SIMULATIONS » Simon Dols (Université de Toulouse, INSA/ICA (Institut Clément Ader)), Manuel Paredes (Université de Toulouse, INSA/ICA (Institut Clément Ader)) 5:00pm Analyse the stress in thread fastener by finite elements to predict the contact damage » Nguyen Hoa Ngan (École de Technologie Supérieure), Yvan Beauregard (École de Technologie Supérieure)
Wednesday 4:00pm - 5:30pm	AMT-5 Composites Manufacturing, Joining & Repair II (Part 2 of 2) Chaired By: Mehdi Hojjati, Concordia U. & Tan Pham, École de Technologie Supérieure Venue Room Mackenzie
4:00pm Optimization of a Robotic Fabric Cutting Process for Carbon Fiber Reinforced Plastic (CFRP) Manufacturing » Pierre-Olivier Dubois (Mechanical Engineering Dept - Polytechnique Montreal), Jonathan Levesque (CTT Group), Lionel Birglen (Mechanical Engineering Dept - Polytechnique Montreal) 4:20pm Inter-Ply Friction Measurement of Out-of-Autoclave Thermosetting Prepreg Composites » Harinderpal Singh Grewal (Concordia Centre for Composites, Concordia University), Mehdi Hojjati (Concordia Centre for Composites, Concordia University) 4:40pm Depth penetration in composites using pulsed thermography: the influence of pulse energy » Jacques Lewandowski (Centre Technologique en Aérospatiale), Clemente Ibarra-castanedo (Visiooimage Inc), Benoit Masson (Bombardier Aerospace) 5:00pm A new approach for surface profile roughness characterization in the laminated composite ply plane » Xavier Rimpault (Department of Mechanical Engineering, École Polytechnique de Montréal), Jean-François Chatelain (Department of Mechanical Engineering, École de Technologie Supérieure), Jolanta Ewa Klemberg-Sapieha (Department of Engineering Physics, École Polytechnique de Montréal), Marek Balazinski (Department of Mechanical Engineering, École Polytechnique de Montréal)
Wednesday 4:00pm - 5:30pm	ASM-5 Fatigue & Fracture Chaired By: Gang Li, Structures Group, Aerospace, National Research Council Canada Venue Room Hochelaga 3
4:00pm Application of Advanced Experimental Mechanics Techniques for Multiaxial Fatigue Testing of Titanium Alloys » David Backman (National Research Council Canada -), Min Liao (National Research Council Canada -), Hiroshi Nakamura (IHI inc), Masahiro Takanashi (IHI inc) 4:20pm Improving Fracture Toughness of Alumina Ceramic with 3D Reinforcement » Mariusz Bielawski (National Research Council Canada -), Jason Lo (Natural Resources Canada), Ruby Zhang (Natural Resources Canada), Babak Shalchi-Amirkhiz (Natural Resources Canada), Dan Walsh (Natural Resources Canada), Benoit Simard (National Research Council Canada -), Shuqiong Lin (National Research Council Canada -), Kenneth Bosnick (National Research Council Canada -), Mike O'toole (National Research Council Canada -), Ali Merati (National Research Council Canada -), Manon Bolduc (DRDC-Valcartier) 4:40pm Effect of residual stress under condition of rolling fatigue contact estimated by Crossland criteria » Nguyen Hoa Ngan (École de technologie supérieure, Department of mechanical engineering), Philippe Bocher (Ecole de Technologie Superieure, Mechanical Engineering Department), Hossein Monajati (Ecole de Technologie Superieure, Mechanical Engineering Department) 5:00pm Carbon Nanotube Network Heater for Joining and Repair » Chun Li (National Research Council Canada -), Michael Jakubinek (National Research Council Canada -), Behnam Ashrafi (National Research Council Canada -), Marc Genest (National Research Council Canada -), Meysam Rahmat (National Research Council Canada -), Andrew Johnston (National Research Council Canada -), Benoit Simard (National Research Council Canada -), Ali Yousefpour (National Research Council Canada -)
Wednesday 4:00pm - 5:30pm	HF-5 Education and Human Factors Training in Aerospace Chaired By: Wayne Rhodes, Rhodes & Associates Venue Room Hochelaga 5
4:00pm A road map - Methods and Competencies, Aviation Maintenance Training taken to Very High Performance Aircraft Experience, with Elevation to Extensive Advanced Training in Unmanned and Space Technologies » Sandford (Sandy) McLeod (Tower Aerospace INc) 4:20pm Newton and Decartes, get outta my head! -The paradigm shift from traditional engineering to Resilience Engineering » Kyla Zimmermann (Transport Canada Rail Safety)
Wednesday 6:15pm - 9:45pm	Senior Awards Reception and Gala Dinner Venue Le Grand Salon
Thursday, 21st May
Thursday 7:00am - 3:00pm	Registration and Administration Venue Room Saint-Charles
Thursday 7:30am - 8:00am	Coffee and Networking Venue Fairmont The Queen Elizabeth Hotel
Thursday 8:00am - 9:00am	PL-4 Plenary Panel - Moderator: Dr. Iain Christie Venue Marquette
8:00am Sustainability in Air Operations » Keith Lawless Air Transat
Thursday 8:00am - 9:00am	PL-4 Plenary Panel Venue Marquette
8:00am Sustainability in Air Operations » Michelle Millar ICAO
Thursday 8:00am - 9:00am	PL-4 Plenary Panel Venue Marquette
8:00am Sustainability in Air Operations » Peter Wolfe Prof. Aviation Board of Cert.
Thursday 8:00am - 9:00am	PL-4 Plenary Panel Venue Marquette
8:00am Sustainability in Air Operations » Keith Lawless Air Transat
Thursday 9:00am - 10:30am	ADD-6 Innovative Design Optimization II Chaired By: Pat Piperni, Bombardier Aerospace Venue Room Hochelaga 4
9:00am Innovative Turboprop Transport Design » Aditya Chattopadhyay (Bombardier Aerospace), Megan Walker (Carleton University) 9:20am Modeling the effects of work package interaction and design changes in aircraft development » David Wynn (Bombardier Aerospace) 9:40am Multidisciplinary Optimization of Composite Parts » Thibault de Lumley (SONACA SA), david dumas (CENAERO), Vinay Madhavan (CENAERO), Michael Leborgne (CENAERO), Ingrid Lepot (CENAERO), Charles Chary (SONACA SA), Albert-Paul Gonze (SONACA SA), Imre Yague (SONACA SA) 10:00am A Predictive Preference Model for Maintenance of a Heating » Mahdi Mohammadi Tehrani (École de Technologie Supérieure), Yvan Beauregard (École de Technologie Supérieure), Michel Rioux (École de Technologie Supérieure), Jean-pierre Kenne (École de Technologie Supérieure), Rejean Ouellet (Matricis Informatique Inc)
Thursday 9:00am - 10:30am	AERO6 Computational Aerodynamics 1 Chaired By: Hong Yang, Bombardier Aerospace Venue Room Duluth
9:00am A NEW INVISCID FLUX-SPLITTING ALGORITHM FOR MULTI-SPECIES REAL GASES » Sina Arabi (École Polytechnique de Montréal), Jean-yves Trepanier (École Polytechnique de Montréal), Ricardo Camarero (École Polytechnique de Montréal) 9:20am Towards Accurate Simulation of Aircraft High-Lift Flows with One- and Two-Equation Turbulence Models » Hong Yang (Bombardier Aerospace), Marc Langlois (Bombardier Aerospace) 9:40am On the Importance of Geometric Conservation Law for Preserving the Temporal Accuracy of URANS Solvers » Ali Mosahebi (École Polytechnique de Montréal), Eric Laurendeau (École Polytechnique de Montréal)
Thursday 9:00am - 10:30am	AMT-6 Advanced Material Removal Technologies II (Part 2 of 2) Chaired By: Ahmad Sadek, NRC Aerospace Venue Room Hochelaga 6
9:00am Development of a Design Tool for Fixtures for Milling Thin-Walled Structures Using Holonomic Constraints and Finite Stiffness Supports » Mouhab Meshreki (National Research Council Canada -), Helmi Attia (National Research Council of Canada), József Kövecses (McGill University) 9:20am Diagnosis of machine tools using Knowledge Extraction and data analysis » yasser shaban (Department of Mathematics and Industrial Engineering, École Polytechnique de Montréal), Soumaya Yacout (Department of Mathematics and Industrial Engineering, École Polytechnique de Montréal), Marek Balazinski (Department of Mechanical Engineering, École Polytechnique de Montréal) 9:40am Trochoidal Milling » Axel Fleischer (MAPAL Dr. Kress KG), Dietmar Michael (MAPAL Dr. Kress KG), Peter Mueller-Hummel (MAPAL Dr. Kress KG), Abdelatif Atarsia (MAPAL Dr. Kress KG)
Thursday 9:00am - 10:30am	AMT-6 Industrialization of Manufacturing Processes Using Industrial Robots Chaired By: Lionel Birglen, École Polytechnique & Bruno Monsarrat, NRC Aerospace Venue Room Mackenzie
9:00am Optimisation de posture robot par anticipation des couples pour assemblage robotisé » Seyedhossein Hajzargarbashi (Bombardier Aerospace) 9:20am Accuracy Management for Robots Subjected to Process-Induced Loads » Bruno Monsarrat (National Research Council Canada – Aerospace), Yves Fortin (National Research Council Canada – Aerospace) 9:40am A magnetic grasping-machining end effector for robotic milling of pockets on thin curved panels » Apple Mahmud (École Polytechnique de Montréal), J. R. R. Mayer (École Polytechnique de Montréal), L. Baron (École Polytechnique de Montréal) 10:00am Developing a Collaborative Aerospace Community using Vision Based Robotics Systems as the reason - (Cancelled) » Serge Boulet (Magellan Aerospace Winnipeg), David Boonstra (Boeing Canada Operations Ltd.), Myron Semegen (Industrial Technology Centre)
Thursday 9:00am - 10:30am	ASM-6 Computation and Structural Modelling Chaired By: Min Liao, Structural Integrity, Aerospace, National Research Council Canada Venue Room Hochelaga 3
9:00am STRUCTURAL OPTIMIZATION OF JOINED WING KIT CONFIGURATIONS UNDER AERODYNAMIC LOAD » Berkan Alanbay (Middle East Technical University / ASELSAN Inc.), Melin Sahin (Middle East Technical University) 9:20am Two-Dimensional Finite Element Simulation of Induction Thermography of an Aluminum Alloy Panel » Gang Li (Structures, Materials, and Manufacturing Laboratory, Aerospace National Research Council Canada), Marc Genest (Structures, Materials, and Manufacturing Laboratory, Aerospace National Research Council Canada) 9:40am EGD-ANN model to predict actuators displacements for an open-loop morphing wing system » Abdallah Ben Mosbah (École de Technologie Supérieure), Tristan Ayrault (École de Technologie Supérieure), Manuel Flores (École de Technologie Supérieure), Ruxandra Botez (ETS, Laboratory of Applied Research in Active controls, Avionics and AeroServoElasticity), Thien-my Dao (Ecole de Technologie Superieure, Mechanical Engineering Department)
Thursday 9:00am - 10:30am	HF-6 Human Factors in Aviation Accident Investigations Chaired By: Jean-Jacques Speyer, Vrije Universiteit Brussel Venue Room Hochelaga 5
9:00am Statistical study of aircraft accidents and incidents related to de/anti-icing process in Canada between 2009 and 2014 » Agathe Aventin (EI.CESI Angoulème), Francois Morency (École de Technologie Supérieure), Sylvie Nadeau (École de Technologie Supérieure) 9:20am Kebnekaise Accident from a Human Factor Point of View » Britt-Marie Karlin (The Swedish Transport Agency (CAA)) 9:40am Transport Disaster Assistance System in Japan » Kakimoto Yukiko (Japan Institute of Human Factors Inc.)
Thursday 10:30am - 12:00pm	ADD-7 Environmental Issues Chaired By: Johan Johnson, Bombardier Aerospace Venue Room Hochelaga 4
10:30am Environmental evaluation of R&D project to support Ecodesign initiatives » Julien Dezombre (Bombardier Aerospace), Miguel Garcia Claro (Bombardier Aerospace), Kahina Oudjehani (Bombardier Aerospace) 10:50am Environmentally Focused Aircraft Study » Graham Potter (Bombardier), Sid Banerjee (Bombardier) 11:10am Printed Electronics Requirements and Demands for Aerospace Projects » David Russel (Zeno Technologlies Inc.)
Thursday 10:30am - 12:00pm	AERO7 Computational Aerodynamics 2 Chaired By: Kurt Sermeus, Bombardier Aerospace Venue Room Duluth
10:30am CFD Simulation of Aircraft Icing Effects using Roughness Modeling » Kurt Sermeus (Bombardier Aerospace), Hong Yang (Bombardier Aerospace) 10:50am Validation of multi-time steps Lagrangian/Eulerian RANS based icing code CANICE2D-NS » Kazem Hasanzadeh Lashkajani (École Polytechnique de Montréal), Simon Bourgault-cote (École Polytechnique de Montréal), Eric Laurendeau (École Polytechnique de Montréal), Corentin Brette (Bombardier), Ion Paraschivoiu (École Polytechnique de Montréal) 11:10am Presentation of Modern Non Linear Lifting Line Methods » Sylvain Gallay (École Polytechnique de Montréal), Eric Laurendeau (École Polytechnique de Montréal) 11:30am CFD++ HIGH SPEED FLOW ANALYSIS ON TURRETS » Octavian Trifu (TechWise Networks Inc.), Patrice Gratton (Bombardier Aerospace), Eddy Zuppel (Bombardier Aerospace), Nicholas Stathopoulos (Bombardier Aerospace)
Thursday 10:30am - 12:00pm	AMT-7 Metallic Structures Manufacturing, Joining & Repair Chaired By: Simon Larose & Priti Wanjara, NRC Aerospace Venue Room Mackenzie
10:30am Electron beam welding applied to a thick aluminium blank for an aeronautic part » adrien barrot (Stelia Aerospace), Marie-Hélène philippe (Stelia Amérique du Nord) 10:50am Tube Hydroforming of Aerospace Alloys: Experiment and Numerical Simulation » M. Saboori (Ecole de Technologie Superieure, Mechanical Engineering Department), J. Gholipour (National Research Council Canada – Aerospace), H. Champliaud (Ecole de Technologie Superieure, Mechanical Engineering Department), J. Savoie (Pratt & Whitney Canada, Special Process Development Group), Priti Wanjara (National Research Council Canada – Aerospace) 11:10am Modeling an Aerospace Manufacturing/Remanufacturing System » Vesra Hashemi (Concordia University), Mingyuan Chen (Concordia University), Liping Fang (Ryerson University) 11:30am Advances in Cold Spray Applications within the Aerospace Industry » Julio Villafuerte (CenterLine Windsor Ltd)
Thursday 10:30am - 12:00pm	ASM-7 NDE & Structural Health Monitoring Chaired By: David Backman, Structrural Mechanics and Health Monitoring, Aerospace, National Research Council Venue Room Hochelaga 3
10:30am Evaluation methodology for inertial measurement units (IMU) in structural health monitoring (SHM) applications » Catherine Cheung (National Research Council Canada -), David Backman (National Research Council Canada – Aerospace), Mark Kotwicz Herniczek (National Research Council Canada – Aerospace), Jobin Puthuparampil (National Research Council Canada – Aerospace) 10:50am A CASE STUDY IN IMPROVING AIRCRAFT INSPECTONS WITH BOND TESTING TECHNOLOGY » Ghislain Morais (Olympus-ossa.com) 11:10am CSERIES In-Service Non-Destruction Inspection of Composite Components » Roy Wong (Bombardier Aerospace) 11:30am A CASE STUDY IN IMPROVING AIRCRAFT INSPECTONS WITH EDDY CURRENT ARRAY TECHNOLOGY » Ghislain Morais (Olympus-ossa.com)
Thursday 10:30am - 12:00pm	HF-7 Knowledge and Skills Required of Airline Pilots Today Chaired By: Victor Ujimoto, University of Guelph Venue Room Hochelaga 5
10:30am PABC's Process for Developing a Global ATP-level Knowledge Exam to Enhance Air Safety & Economic Development » Peter Wolfe (PABC) 10:50am Competency-based Exam Development Process: Lessons Learned in the Professional Pilot Domain » Manoj Patankar (Saint Louis University) 11:10am The Impact of Unlearning on Flight Operations Safety » Triant Flouris (Hellenic American University), Evangelia Siachou (Hellenic American University)
Thursday 12:15pm - 2:00pm	CASI Turnbull Lecture Luncheon & Presentation of GARDN Awards - Lecturer: David Zingg, U of Toronto Venue Le Grand Salon
Thursday 2:00pm - 4:00pm	Fairwell/Tour - NRC Aerospace’s Structures, Materials & Manufacturing Laboratory Venue U. of Montreal Campus
Thursday 3:30pm - 5:00pm	Fairwell/Tour - Bombardier Aerostructures and Engineering Services Venue St-Laurent Plant 1

Email Support • Blog • Privacy Policy • Cancellation Policy

Monday, 18th May

Tuesday, 19th May

Wednesday, 20th May

Thursday, 21st May